Extraordinary Maintenance; Machine Disposal - FRANCO NEBBIA Serie Manual

500 hours of operation and, subsequently, every 1000 hours
of operation.
Spent oil can be emptied through the plug at the back of the
pump or, considering the small quantities involved, it can be
sucked up with a syringe.
Replace the spent oil with standard 15W40 oil.
2. Check and, if necessary, replace the water seals on the
pump and suction delivery valves every 1000 hours of
operation.
The pump manufacturer has made available some videos
showing how to perform this and other pump
maintenance operations:
https://www.interpump.it/english/video.aspx.
However, given the complexity and the need for specific
tools, we recommend having these tasks performed by a
qualified and authorized service centre.

9. EXTRAORDINARY MAINTENANCE

The manufacturer recommends that an authorized repair shop be
contacted for any operations that do not fall under normal
maintenance.
These operations are to be carried out only by qualified
personnel, who have all the technical skills to perform
these operations safely and in full compliance with the
relevant laws in force.
It should be pointed out that the right to the warranty offered by the
manufacturer shall be void if:
• The instructions given in the "use and maintenance manual"
are not scrupulously complied with;
The scheduled maintenance services are not carried out;
•
Lubricants other than those indicated are used;
•
• Repairs or maintenance are carried out by unqualified
personnel;
Non-original spare parts are used;
•
Unsuitable work equipment is used
•
L-LC191.01.FN
EN
It is the Customer's responsibility to verify that only
original spare parts, which are the only parts that will not
compromise machine safety, are used for repairs.
When ordering spare parts, ensure that the machine model, the serial
number, the part reference number from the spare parts booklet and
the quantity are specified to the manufacturer.

10.1 MACHINE DISPOSAL

At the end of its working life, this machine is to be scrapped and
disposed of by handing it over to the local separate waste collection
system pursuant to and in scrupulous compliance with current
legislation. Before scrapping, check the machine's serial number
label. If the label bears this symbol
regulated by Legislative Decree no. 151 of 25/07/2005 and directive
2002/96/EC on Waste Electrical and Electronic Equipment (WAEE).
You should therefore become apprised of the local waste collection
system for electrical and electronic products and comply with its
requirements. Improperly disposing of this product as normal
municipal waste may result in serious harm to the environment and
human health, and may be subject to penalties from local authorities.
11. TROUBLESHOOTING
The table below lists the defects that are most commonly found in
normal use of the machine.
The causes of these operating defects are easily solved with
operations that fall within the scope of ordinary maintenance.
If the defect is not listed in the table below or cannot be eliminated
by following the recommendations found herein, it is suggested that
you contact a qualified and authorized service centre.
10. DISPOSAL
, this means that disposal is
45 / 72