Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 ASSEMBLY
10
–
Insert the key and check whether the tumblers with the
number 1 are correct.
All tumblers close flush with the locking cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
Tip
It is recommended that you note the numbers of
the matching tumblers so that the subsequent
locking cylinders can be equipped immediately.
500517-01
–
Repeat the steps for chambers
first six chambers are fitted with the correct wafers.
–
Insert the key.
All tumblers close flush with the locking cylinder.
500518-01
–
Grease and mount the O-ring
Long-life grease (
–
Position and insert locking cylinder as shown.
The engaging plate
Engaging plate
502166-01
–
Pull up the locking lever.
–
Position lock handle
as shown.
The lever points to the right.
–
Mount and tighten screw
Info
The hook looks
cover's lock installation, see Section 8
502167-01
–
Key position 90° to the left to open.
–
Key position upward for locking.
500626-01
B
D
F
,
, and
3
(included).
p. 16)
bl
points downward.
bl
engages.
5
(included) on the locking cylinder
4
7
with washer
(included).
6
(included) are needed for the
until the
Tabla de contenido
