Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.1
Assembly
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
Luggage affects the handling, cornering and braking characteristics, particularly when fully laden, and
increases crosswind sensitivity.
–
Ride especially carefully in strong wind.
–
Slowly accelerate to the permitted maximum speed.
Maximum speed with luggage mounted
Warning
Danger of accidents Overloading, a one-sided payload, or the luggage slipping impairs handling characte-
ristics.
–
Comply with the maximum permitted payload.
Payload for each side case
–
Always use two side cases simultaneously and distribute the luggage evenly on both sides.
–
Secure the luggage to prevent it from slipping around inside the side cases.
Info
Do not use a pressure cleaner to clean the top case, as the high pressure may damage the seal. Use a neu-
tral cleaning product (water with mild soap).
130 km/h (80.8 mph)
10 kg (22 lb.)
Condition
For mounting the case, the appropriate case rack (not included) is
required.
Mounting the locking cylinder
–
Insert springs
E
.
Tip
The locking cylinder comes with many small parts.
It is recommended that you perform the assembly
while seated at a table.
502164-01
–
Insert wafers
A
bers
,
502165-01
bk
(included) into chambers
9
(included) with the number 1 into cham-
C
E
, and
.
ASSEMBLY 5
A
C
,
, and
9
Tabla de contenido
