Ausek G Serie Manual Del Usuario página 7

Step1: Slide the switch to"TEST"position(The screen is on)；
Step2: Press"Menu"key to enter the setting interface；
Step3: Press ▲, ▼ to scroll through the setting options, and the
"OK" button to confirm the setting；
Step4: Press "MENU" key to exit.
Setting of "TimeLapse"
Time Lapse
Shooting Interval
H : M : S
00 00 00
Notification:Motion
sensors deactivated
Back Select
MENU OK
Note: When "TimeLapse" is ON,The camera can shot photos only. And the trigger
function fails.
Setting of "Time
Setting"
Settings
Timer Setting
Hr : Min
Start: 00 00
Stop: 00 00
Back Select
MENU OK
Note: When "Timer Setting" is ON,the camera does not work outside the set working
hours.
USB cable connection computer precautions
You can browse, copy, and delete the
connecting the camera to your computer with an USB cable. When using the USB
connection, make sure that the switch is on TEST mode.
1.The memory card cannot be formatted via USB when connected to the computer.
2.Before connecting USB, please input the password if the camera is setting.
● Slide the switch to "TEST"
position(The screen is on)；
● Setting of "TimeLapse"：Press
"Menu"

"TimeLapse" to set the shooting interval.
● The photos taken are compressed into video format, enter
"REPLAY" to view.
● Slide the switch to "TEST"
position(The screen is on)；
● Setting of "Time
Setting"：Select "Time
Setting"

→

Select "ON"

"OK"

images and videos on your computer by
→

Set the working time period.
Mode
PIR Interval
PIR Level
Capture Num
Video Length
Video Size 720P
MENU Back OK Select
→
Select
→

Press
05