Return
Real time
monitoring
Photo mode
Manual shooting
Photos/videos
in cam
6.Exit WIFI:
Method 1: Press the return arrow "<" which on the top left of the APP (as
shown in the picture "Home Screen") to exit the WIFI. and the camera will
return to "TEST" or "ON" mode, and the indicator light will turn off.
Method 2:Short press the
camera returns to the "TEST" interface and the indicator light turns off.
NOTE:
①. When connecting with Wi-Fi, make sure to keep your phone and the
camera as closer as possible.
②. After exiting from the App, the Wi-Fi will disconnect. The camera will go
back to the original mode prior to the connection.
③. If there is no signal transmission between the camera and the phone within
the "Automatically turn off WIFI" time set by the camera, the camera will
disconnect the Wi-Fi and go back to the original mode prior to the connection.
Setup the camera outdoor
Once all the setting has been done,the camera is ready for field use:
● Mount the camera about 0.5-2m high with the camera pointed at a slight
downward angle.
● Keep the camera facing north or south NOT east or west due to sunrise
and sunset could produce false triggers and overexposed images.
● Clear all obstructions in front of camera to avoid obscuring camera lens or
PIR sensor.Otherwise,the camera may be triggered by mistake during windy or
hot days.
Video mode
Camera setup
Home Screen
◄
button on the camera to exit the WIFI. The
Photo
Video
Photo and video browsing
Select
08