Product Use - PLAYKIN VESPA Manual Del Usuario

1. Pass the square tube through the body. Then put the side wheels on the two sides and tighten
the two screws to fix the wheels.
2. Mount the mudguard on the round tube on the front axle, pay attention to the alignment of
the iron sheet with the hole in the mudguard, then pass the round tube through the body and
make it come out of the end of the body.
ATTENTION: When the round tube passes through the body, keep the round tube
away from the cable inside the body.
3. First remove the screw, then insert the car head line into the car body line, hide the lines to the
car head. Place the head into the round tube and make the screw through the hole of the car
head and the hole of the tube, tighten the screw.
4. Remove the screw from the car seat, fit the seat to the car body (make sure that the battery
line is already connected), align the holes in the car seat with the two holes in the car body and
then tighten the screw.
5. Fit the mirror into the left and right handlebar holes.

PRODUCT USE

CONTROLS
1-Forward/backward
ATTENTION: Make sure your child knows how to turn, start and stop the vehicle and
knows the rules for safe use.
5-Music switch
4-Speed
37
2-On/Off
6-Mp3 player
3- Accelerator pedal
EN