Install The Glue Stick; Install The Battery Pack; Remove The Battery Pack; Operation - GreenWorks PA441 Manual Del Operador

EN
8.2

INSTALL THE GLUE STICK

5
Do not feed any other objects into glue stick entry except
the specified glue stick.
1. Insert the glue stick into the glue stick entry (4) and slide
down gently.
2. Push the trigger (5) for few times to allow the glue stick
to be pushed forward.
8.3

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
4
WARNING
WARNING
English
9

OPERATION

Always wear eye protection.
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
9.1

START THE MACHINE

1. Push and hold the on/off switch (3) for 3 seconds to turn
the machine ON.
2. The LED indicator (2) glows red to indicate the machine
is heating up.
3. The LED indicator (2) glows green after approximate 90
seconds to indicate the machine is ready to use.
9.2

STOP THE MACHINE

1. Push and hold the on/off switch until the LED indicator
off.
The nozzle will remain hot for a few minutes. Allow the
nozzle to cool down and the glue to solidify before storing.
8
WARNING
WARNING
2 3
CAUTION