Installing The Speaker - Fujitsu Ten Eclipse TD307II Manual Del Propietário

This speaker can be installed and used on a floor, and it can also be installed to a ceiling or wall. If installing to a
ceiling or wall, use screws (sold separately) to install it and also be sure to install the drop-prevention wire.
Caution
• Be sure to read this owner's manual thoroughly before carrying out installation and connecting the wires.
• If installation methods or non-standard parts not specified in this owner's manual are used, accidents or injury
may result.
• Specialized knowledge is required in order to install the speaker to a ceiling or wall. Ask a qualified technician
to install the speaker in such cases.
• Installation of the speaker should always be carried out by two or more people.
• The screws to be used for installing the speaker and drop-prevention wire to a ceiling are not included with the
speaker. (Speaker installation hole diameter: 7 mm)
Example of installation to a ceiling or wall
Example 1.
Speaker wire
(7 mm diameter or more)
Ceiling
Wall
Leave enough
space.
Example 3.
Speaker wire (7 mm
diameter or more)
Speaker wire
(for diameter of less
than 7 mm)
Tip
• The forward/back direction of the base will be reversed.
• In the case of example 2 and example 4, it will be necessary to adjust the assembly positions of the speaker
base and speaker neck. Refer to page 12 for details on changing the assembly positions.
Caution
Be sure to leave some space in between the speaker and the wall so that the speaker and wall do not touch.

Installing the speaker

Speaker wire (for diameter
of less than 7 mm)
0˚ - 30˚
Caution
C i
Leave
Wall
Ceiling
enough
space.
60˚ - 90˚
Example 2.
Speaker wire
(7 mm diameter or more)
Ceiling
Wall
Leave enough
space.
Example 4.
Speaker wire
(7 mm diameter
or more)
Tip
Speaker wire
(for diameter of
less than 7 mm)
- 6 -
Tip
Speaker wire
(for diameter of less
than 7 mm)
35˚ - 90˚
Caution
C i
Leave
Wall
enough
Ceiling
space.
0˚ - 55˚
Speaker