Care And Maintenance; Technical Data - Irradio IR DA3 TUBE Manual De Instrucciones

Bluetooth Source Pairing
Once the installation has been completed, it is possible to start the reco-
gnition procedure via Bluetooth between the amplifier and the source to be
used via a wireless connection, typically a smartphone or tablet. Proceed
as follows:
• Press the INPUT button on the front of the device several times until
the flashing blue BT LED on the front
• On the source, start searching for available Bluetooth devices.
• Select the device "IR-DA3 Tube".
• Wait a few moments until the blue LED on the front stabilizes.
• Start audio playback using the relevant app on your mobile device.
• If, after a minute, the association has not been successful, or the fla-
shing of the blue LED has not stabilized, turn the amplifier off and on
again, restart the mobile device and repeat the procedure from the be-
ginning
• Once the first pairing has been made, the mobile device should con-
nect to the amplifier automatically if within the surrounding range of
about 10 meters, as long as the BT input is selected.

Care and Maintenance

The product does not require any maintenance. For periodic cleaning, use
a soft slightly damp cloth, taking care to disconnect the power from the
socket. Avoid any aggressive detergent or abrasive sponges, as the sa-
tin-finish metal structure could be irreparably scratched or stained. Wait for
the complete drying of the surfaces before proceeding with the electrical
reconnection and restarting.

Technical Data

Output power RMS on 8 Ohm: 2 x 18 Watt
Output power RMS on 4 Ohm: 2 x 25 Watt
Total harmonic distortion: <= 1%