Care And Maintenance - Hilti NURON VC 140-2-22 Manual Del Usuario

6.3 Vacuuming up dry dust
Before vacuuming up dry dust, especially dust from mineral materials, always check to ensure that
the correct dust bag is fitted in the container. The material vacuumed up by the vacuum cleaner can
then be disposed of cleanly and easily.
CAUTION
Risk of injury by dusts that are hazardous to health! Hazardous material that has been vacuumed up can
escape if a filter element is not used.
▶ Use the vacuum cleaner only with a filter element installed.
▶ Check that the filter element is dry and that the correct type of dust bag is fitted.
6.4 Vacuuming up liquids
CAUTION
Risk of injury by dusts that are hazardous to health! Hazardous material that has been vacuumed up can
escape if a filter element is not used.
▶ Use the vacuum cleaner only with a filter element installed.
When the appliance is used to vacuum up drilling slurry and solid materials, there is a possibility of
the filter element being damaged. Take note of changes in suction power when vacuuming up these
substances.
1. Check the container level monitoring system. → page 13
2. If possible, use a separate filter element for wet applications.
6.5 After vacuuming up liquids
1. Open the 2 latches.
2. Lift the suction head off the waste material container and place the suction head on a level surface.
▶ Allow the filter element to dry.
3. Empty the waste material container and use a water hose to wash out the waste material container.
4. Check the container level monitoring system. → page 13
5. Clean the dry filter element by wiping it with your hand.
6. Check the filter element for damage.
▶ Replace a damaged filter element.
6.6 After use of the vacuum cleaner
1. Turn the control switch to the OFF position.
2. Empty the container and clean the vacuum cleaner with a damp cloth.
3. Store the vacuum cleaner in a secure, dry place where it is inaccessible to unauthorized users.
▶ CAUTION This vacuum cleaner may be stored only indoors.
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care of the product
• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.
*2330316*
2330316 English 11