Display-Relay Test Function; Programming - DIEL ME 200 E Manual De Instalacion Y Uso

Press simultaneously the keys
few seconds to enter the PROGRAMMING
menu, the message PRG appears, then
parameter F in the first display will indicate
and the configuration in use
Choose the desired configuration by pressing
the UP/DOWN keys choosing between:
• 0: eight probes without fans control.
• 1: eight probes with fans control.
• 4: access to the advanced programming
menu.
>> Paragraph ADVANCED

PROGRAMMING

Confirm with
ME 200 E

DISPLAY-RELAY TEST FUNCTION

DISPLAY TEST: press the key
and displays will turn on for a few seconds.
RELAY TEST: press the key
message rEL appears and then the first PRE relay
is proposed.With the keys
to switch between 0 and 1 to energise and de-
energise the relay, once the test is completed press
to go to the next relay, press
test function at any time.
PROGRAMMING
- 26 -
for a
ENG
, all the LEDs
for 3 seconds, the
it is possible
to exit the