After Use - Titan TTB2700PRW Manual Del Usuario

TTB2700PRW byTITAN TTB2700PRW byTITAN

After use

1. Release the trigger (9d) (Fig. 24).
2. Turn the on/off switch to "0" position.
3. Turn off the water tap.
4. Squeeze the trigger to release the pressure still present in the product.
WARNING! Only separate the high-pressure hose from the spray gun
and the water hose from the product when no more pressure exists in
the system! Also ensure that the product is turned off and separated
from power supply!
5. Lock the trigger.
6. Separate the water hose from the water supply and then from the water inlet
hose adaptor with water filter (21).
7. Wind the pressure hose (3) onto the hose reel (2). Ensure that the hose is
not bent or twisted but winded up evenly.
8. Dismantle the accessories in the reverse sequence of the assembly
instructions if you are not going to use this product for a long period of time.
9. Check, clean and store the product as described below.
The golden rules for care
WARNING! Always squeeze the trigger to release the pressure still
present in the product first.
Always switch the product off, disconnect it from the power supply
and let the product cool down before performing inspection,
maintenance and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
96262_IM_TTB2700_4L.indb 31 96262_IM_TTB2700_4L.indb 31
9d
0
Fig. 24
Operation / Care and maintenance
EN EN
31
2021/9/16 下午5:07 2021/9/16 下午5:07