Water Filter - Titan TTB2700PRW Manual Del Usuario

TTB2700PRW byTITAN
Nozzle
Remove any dirt deposits from the
nozzle (18/20) hole using the cleaning
needle (25) (Fig. 25).

Water filter

1. Before each use check the water filter (21a) is clean.
2. Unscrew and remove the water inlet hose adaptor with water filter (21) from
the water inlet (6).
3. Disassemble the water inlet hose adaptor with water filter (21) (Fig. 26-1).
4. Rinse the water filter (21a) with clear water(Fig. 26-2).
Decalcification
From time to time – according to the nature of your tap water – calcium deposits
form in the product and accessories. The strength of the deposits (and thus the
frequency of decalcification) depends upon the degree of hardness of the water
and how often the product is used. Check with your supplier in order to find the
hardness of the water in your area.
NOTE: Use a mixture of water and citric acid or vinegar for
decalcification. These substances are readily biodegradable and
environmentally friendly!
1. Make a mixture of one part of proper vinegar and two parts hot water (≤ 50°C)
in a suitable container, e. g. in a bowl.
2. Lay the detachable accessories in the mixture.
3. Leave the accessories in the mixture for approximately 12 hours.
4. Rinse the accessories with clear water.
96262_IM_TTB2700_4L.indb 33 96262_IM_TTB2700_4L.indb 33
21a
21
Fig. 26-1
Care and maintenance
18
20
25
Fig. 25
Fig. 26-2
EN
33
2021/9/16 下午5:07 2021/9/16 下午5:07