Tabla de contenido
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Fill the salt (IF AVAILABLE)
To add softener salt, open the salt compartment cap by turning it counter clockwise.
At first use, fill the compartment with 1 kg salt and water
available, using a funnel
will make filling easier. Replace the cap and close it. After every
4
20-30 Cycles add salt into your machine until it fills up (approx. 1 kg).
1
3
Only add water to the salt compartment on first use.
• Use softener salt specifically produced for use in dishwashers.
• When you start your dishwasher, the salt compartment is filled with water, therefore put the
softener salt in prior to starting your machine.
• If the softener salt has overflowed and you do not start the machine immediately, run a short
washing program to protect your machine against corrosion.
12
1 2
3
until it is almost overflowing. If
2
4
EN
B
Using the appliance
Test Strip
Run water
Keep the
through the
strip in the
tap (1min.)
water (1sec)
1
1
munite
second
NOTE
The level is set to 3 as default. If the water is well water or
has a hardness level above 90 dF, we recommend that you
use filter and refinement devices.
Water Hardness Table
Level
German dH
French dF
1
0-5
0-9
2
6-11
10-20
3
12-17
21-30
4
18-22
31-40
5
23-34
41-60
6
35-50
61-90
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains
water supply. To find out the hardness level of your tap water, contact your water company or
use the test strip (if available).
13
Set the
Shake the
hardness
Wait (1min.)
strip.
level of your
machine.
1
2
3
1
4
munite
5
6
British dE
Indicator
0-6
Wash LED is on.
7-14
Dry LED is on.
15-21
End button is on.
22-28
Wash and Dry LEDs are on.
29-42
Wash and End LEDs are on.
43-63
Dry and End LEDs are on.
EN
Tabla de contenido
