Using The Product - nedis WLTK1010BK Guia De Inicio Rapido

Using the product

Power button A
Menu button A
PTT button A
5
Scan button A
8
Up button A
9
Monitor button A
Down button A
Lock button A
q
Display A
3
Lamp button A
Micro USB port A
Press and hold for 3 seconds to switch the product on
7
or off. A beep will sound.
Press 1x to select the channel.
7
Press 2x to select the CTCSS code.
Press 3x to select the DCS Sub-channels.
Press 4x to select the VOX settings.
Press 5x to select the call tone. (CA)
Press 6x to switch the key tone on or off. (TO)
Press 7x to switch the roger beep on or off. (RO)
Press 8x to select the Dual Channel Monitor. (DCM)
Press to send a call tone. The tone will be transmitted
over the set channel.
Press and hold to talk.
Press to scan for radio channels.
Press to increase the volume.
Press and hold for 3 seconds to activate the monitor.
9
Press to decrease the volume.
q
Press and hold for 3 seconds to lock or unlock the
product.
Press A
7
light.
Press and hold to switch on the lamp.
6
The product can be charged in the charging base or
r
via the Micro-USB port on the side of the product.
It is recommended to switch off your radio during
4
charging.
1. Plug the micro USB cable A
port A
2. Plug the other end of A
power adapter.
3. Plug the power adapter into a power outlet.
4. Place the walkie talkies in the charging slots A
5. The battery icon on the display flashes to indicate
the product is being charged.
A A or A
8 9 q
r .
7
to switch on the display
a into the micro USB
a into a computer or
e .