Weka FU6 D/C Instrucciones De Servicio página 14

2.1 Frequency converter FU6 D (Display)
In the course of continuous improvement of our products, the existing frequency converter FU6 D has been
equipped with some new features. Both the user and the service technician hereby have significant advantages
in operation and maintenance of the frequency converter.
Outstanding new features include the integration of a Bluetooth
software updates (with the help of the "WEKA Service App"), as well as a display with membrane keyboard for
changing settings and indication of operational state und error conditions.
Below, the individual menu items are described in more detail in their functionality and operation. The complete
menu structure can be found in the attached diagram.
Navigating through the menu items is done by pressing the buttons
The starting point is always the home screen ("MASCHINE" respectively "HOME") from where all the other
menu items can be accessed. At all times the user can return to the home screen by pressing
.
By pressing sub menus can be entered or settings can be selected and changed. By long pressing
changes will be saved. At the footer for each menu item the specific actions of the keys are explained, basically
the complete menu is designed to be self-explanatory.
Once a connected machine has been started user inputs on the keypad will be ignored due to safety reasons.
menu item Description
After the converter has been booted successfully it will show all compatible machines.
MASCHINE
Once a machine has been connected the screen will automatically switch to the
respectively
illustration of the machine. The code „1~" respectively „1P" or „3~" respectively „3P"
HOME
indicates whether the converter has recognized single phase or three phase operation.
When starting the machine the screen will automatically switch to displaying the load
conditions (working load of the machine). When disconnecting the machine the screen
will automatically show all compatible machines again. By pressing
manually toggle between „HOME" and „MASCHINE" .
UPDATE After initiating the update process by pressing
within which the user can connect to the converter utilizing the „WEKA Service App" (see
additional information below) and if necessary apply a firmware update. The user will be
guided through the process with information on the display of the converter as well as on
the app. This part of the process can be aborted without risk at any time by pressing
already downloaded data will be refused and the process will start from the beginning
once the user has initiated it again. In case the update process fails please contact
WEKA, we can help you to restore the converters firmware.
All of the listed languages can be set as the default language of the converter. The list of
LANGUAGE
available languages will be extended from time to time and can be updated using the
update feature. By pressing
will be stored as default language.
By changing the backlight brightness the readability of the display can be adopted to
BRIGHTNESS
many situations. Even in case of direct sunlight the display will remain its high contrast
due to its ability to use the sun as light source. By pressing
be changed and by long pressing
In single phase operation mode the maximum input current can be reduced to 15A or
CURRENT
even 10A. By doing so it is possible to operate a machine even if the mains supply is
weak or an inadequate generator is used. By pressing
changed and by long pressing
input current it will be indicated by the symbol
The speed of the unit types HD16/18 can be alternated between "Normal" and "Fast" –
HD16/18 SPEED
see technical data.
®
interface for simple and secure execution of
and
an adequate time frame will be opened
a language can be selected and by long pressing
it will be stored.
it will be saved. Once the converter is set to a reduced
or
13
.
the user can
the brightness level can
the current setting can be
in the header of the display.
,
it