The remaining instructions in this section are for practitioner use only.
Maintenance must be carried out only by competent personnel (practitioner or suitable trained
technician).
The following routine maintenance is to be carried out at least annually.
• Inspect O-ring regularly
• Check that the device functions properly, if not fault find as per Fitting Advice.
6 Limitations on Use
Intended Life
A local risk assessment should be carried out based upon activity and usage.
Lifting Loads
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment
Avoid exposing the device to corrosive elements such as acids, industrial detergents, bleach or
chlorine.
The use of creams of lotions with this device should be used with caution as these can foul the
valve.
The product is waterproof to a maximum depth of 1 metre. Thoroughly rinse with fresh water
after use in abrasive environments such as those that may contain sand or grit, for example,
to prevent wear or damage to the device. Thoroughly rinse with fresh water after use in salt or
chlorinated water.
Exclusively for use between -15 °C and 50 °C
(5 °F to 122 °F).
7
934329PK1/1-0222