VMB Dimmers DS-Pro Manual De Usuario página 32

PROGRAMMING EXAMPLES
- How to change the DMX address to 359.
When being in the main screen, press
options; the first to appear is TEST.
Press the arrow
Press the arrow
until you get to the DMX Address.
Once you are in the DMX Address option, press
that the cursor is located just under the digit of hundreds. If you
press the key
if you press it continuously the number will be automatically
increased. In the present example maintain the key pressed until
you get to 3.
Once the number of hundreds is set, press
tens. Press the key
Now we pass to the unities by pressing the key
repeat the previous operation until we get to number 9. When
the operation is finished, press the key
You will get back to the main screen pressing 5 times
the Dimmer is ready to start working again.
NOTE: The Dimmer constantly checks whether the introduced
DMX address is correct or not in order to avoid the introduction
of incorrect addresses. For instance, if the number for the
hundreds is 4, the one for the tens is 1 and the one for the
unities is 3, when we will try to increase the hundreds to number
5, as the channel 513 does not exist in the DMX directive,
they will pass from 4 to 0 jumping over the number 5. When
this will happen, you will have to changeany of these digits; in
this case, the tens or the unities.
pag. 32
to the next option.
to get to next option. Repeat this process
, you increase the hundreds by one unity and
until you get to number 5.
to get to the diverse
. You can see
to pass to the
and we
to quit the edition.
. Now
VMB Española S.A.
Lv:
DMX Address: 001
1. Test
All Ch1 Ch2 Ch3
2. Pre-Heat (–)
All: -- Ch1: 00
5. DMX Address
Start Ch: 001
5. DMX Address
Start Ch: 350
5. DMX Address
Start Ch: 359
5. DMX Address
Start Ch: 413