TecTake 403349 Manual De Instrucciones página 4

2) Method of application
The Juicer is designed with double safety system, and can start working only after all parts are
installed correctly.
Please install and use the Juicer as follows:
1. Turn the Body's switch into position "0", and put the Center Ring into the Body as per Fig.1.
2. Put the Juicing Sieve into the Center Ring as per Fig.2 and ensure that the Juicing Sieve is installed
correctly on Motor Wheel
aged, do not use it).
3. Put the Top Cap into the Body from the right above as per Fig.3 and install it in direction indicated on
the Top Cap.
Fig.1
(Check the completeness of Juicing Sieve before use. If dam-
Fig.2
4. Put and press the Clamp to two lugs on Top Cap. It is
correctly installed with a cluttering sound, or the Juicer will
not work.
5. a. Slightly tilt and put the Pomace Cup under outlet of
Center Ring;
b. Push the Pomace Cup bottom to the Body to install it.
6. Put the Juice Cup under the Juice Outlet.
. 4 .
Fig.3