TROUBLESHOOTING
Problem
Appliance without function
even though the plug is
inserted
Appliance runs only for a
brief period
The appliance runs, but does
not cool
Water drips out when the
appliance is moved
Stand 9.8.2022
Remedy
Check if the safety switch has been
activated or if a fuse has been tripped.
Fuse (3.15 A/250VAC) in the appliance
defective; contact our customer service
department.
Wait for 3 minutes before switching the
appliance back on.
Battery of the remote control drained?
Has the plug been inserted properly?
The target temperature is too close to the
current room temperature
The air outlet is blocked.
Close windows and doors
Switch off other sources of heat such as
lamps or heaters
Clean the filter.
Make sure air inlet and air outlet are not
blocked.
The target temperature is too high
Empty the water tank before moving the
appliance.
Only set up the appliance upright on a
level surface
DE
EN
FR
NL
IT
ES
PL
47 von 152