Weka FU15 D Manual Original página 14

UPDATE
After initiating the update process by pressing
within which the user can connect to the converter utilizing the „WEKA Service App" (see
additional information below) and if necessary apply a firmware update. The user will be
guided through the process with information on the display of the converter as well as on the
app. This part of the process can be aborted without risk at any time by pressing
downloaded data will be refused and the process will start from the beginning once the user
has initiated it again. In case the update process fails please contact WEKA, we can help you
to restore the converters firmware.
All of the listed languages can be set as the default language of the converter. The list of
LANGUAGE
available languages will be extended from time to time and can be updated using the update
feature. By pressing
as default language.
By changing the backlight brightness the readability of the display can be adopted to many
BRIGHTNESS
situations. Even in case of direct sunlight the display will remain its high contrast due to its
ability to use the sun as light source. By pressing
by long pressing
Converter and hand control a connected via Bluetooth. In case the converter or the hand
PAIRING
conrol hast p be replaced once, both components have tob e reconnected (pairing). Please
follow these steps:
1) Turn on the inverter and connect a WS76H.
2) Use the arrow keys on the inverter to navigate to the "Pairing" menu item and follow the
3) Hold down the
4) Press the Enter button on the inverter to start pairing.
5) Wait until the pairing process is completed, the inverter "pairing successful" is displayed
Please ensure that only one remote control unit and converter are paired at the same time, as
this may lead to a conflict of the devices.
The FU15D is regularly fitted with a 32 A CEE 5P plug, for being able to transfer the maximum
CURRENT
power fort he wall saws. With the adaptor cable 32A coupling – 16A plug (part no. 8705254)
the converter can also be operated ona 16A socket. By pressing
be changed and by long pressing
input current it will be indicated by the symbol
The speed of the unit types HD16/18 can be alternated between "Normal" and "Fast" – see
HD16/18 SPEED
technical data.
The integrated real time clock provides the possibility to keep track of the daily usage of the
TIME
converter. The format of time and date can be adjusted according the specification of the
country. By pressing
they can be changed. Once the format of time or date has been changed it will be stored by
long pressing
DEBUG The readout of real time data (for example motor frequency, mains frequency, intermediate
voltage, motor current, ...) provides additional information for troubleshooting in case of error
or malfunction. This menu item is mainly dedicated to a service technician.
DEVICE INFO An overview of device specific settings and version numbers helps to identify internal
components and the overall condition of the converter. This is especially helpful for the service
technician to evaluate if an update may be necessary.
Once an error message shows up simultaneously a copy of this error including the time stamp
ARCHIVE
will be stored. By doing so it is possible to insight the history of the converter at a later time.
By long pressing
a language can be selected and by long pressing
it will be stored.
instructions on the display!
and
Keep the buttons pressed until all LEDs flash slowly at first and then quickly. When the
LEDs flash quickly, release the buttons.
and the LEDs on the hand control stop flashing. This process takes about a minute. This
completes the pairing.
the individual values can be selected and by pressing
.
the content of the error storage will be cleared.
an adequate time frame will be opened
the brightness level can be changed and
buttons and turn on the handheld controller.
it will be saved. Once the converter is set to a reduced
16 in the header of the display.
13
, already
it will be stored
the current setting can
and