Troubleshooting - Impecca DVHP9112 Manual Del Usuario

TROUBLESHOOTING

Problem
The Power light does not come on
No picture
No sound
Distorted picture
Flickering or unstable brightness.
The player does not operate.
No response when buttons are
pressed.
The remote control handset does not
work.
If you experience any issues that are not listed above, or if you are unable to resolve your issue after trying the
methods and solutions described above, please contact Impecca technical support team:
All manuals and user guides at all-guides.com
Solution
1. Plug the power cord into a wall outlet.
2. Try a different wall outlet.
1. Select the appropriate video input format on your TV in
order to receive the player's output signals.
2. Fully insert the plugs on the video cable into the
corresponding jacks.
1. Fully insert the plugs on the audio cable into the
corresponding jacks.
2. Switch on the stereo system (if applicable).
3. Select the correct output in the setup menu.
1. Remove and clean the disc
2. Some distortion may occur during the FORWARD and
REWIND operations. This is normal.
1. Connect the player directly to your TV.
NOTE: Disruptions can be caused by copy protection
systems on a DVD or CD.
1. Be sure that a disc is loaded.
2. Be sure that the disc is compatible (check the disc's
format and color signal coding standard).
3. Check that the disc is correctly loaded.
4. Clean the disc.
5. Be sure that the DVD player settings are correct.
1. Switch off the DVD player, unplug the power cord, and
then plug in the power cord and switch it on again.
1. Point the remote control handset at the sensor.
2. Check that the remote control is no more than 7 meters
from the sensor
3. Replace the batteries with new batteries.
Email: [email protected]
Website: www.impeccausa.com
- 18 -