Operation Description - Genius SP-HF380BT Guía Rápida

Operation Description

1.
The USB power plug of speaker is plugged in.
USB Port
2. Turn on the power and enter the LINE
always on. At this time, the audio cable can be inserted into the audio device to play
music.
3. Short press
blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After
the pairing is successful, there will make a notification sound. The blue LED is always
on. At this time, the audio device can play music.
4. Short press
resume playback. Short press
twice consecutively to go to the previous song, long press
control to increase the volume, and the speaker sounds louder. Short press
the remote control, the volume decreases, press twice consecutively to go to the
next track, long press
and the speaker sound is reduced.
5. Pairing: In the Bluetooth status, long press
seconds. When the speaker will make a notification sound, it indicates that the
current pairing device is released and the pairing mode is entered. The blue LED
flash alternately. At this time, Bluetooth device pairing can be performed.
6. After press
is a paired device, it will return to the paired device. If there is no paired device, it
will enter the pairing mode.
7. In pairing mode, search for Bluetooth pairing device 3 times, and it will
automatically turn off if there is no signal for 5 minutes in Bluetooth mode.
8. Turn off: Long press the
9. After restarting, the volume level will automatically return to the middle value, and
the last volume level will not be remembered.
AC Plug
USB Port
button on the remote control to enter the Bluetooth status, and the
button on the remote control to stop playing music, click again to
button on the remote control to decrease the volume,
button on the remote control to enter the Bluetooth mode. If there
button for 3 seconds to turn off power and the LED.
function by default. The red LED is
on the remote control, increase the volume, press
button on the remote control for 3
English
button on the remote
on