Mellerware SAXONY 3V Manual De Instrucciones página 3

2.4.2. If the power cord is damaged, the manufacturer
or its service agent or a similarly qualified person must
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer's
liability null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance's protective film(if
applicable).
3.1.2. Before using the product for the first time, clean
the parts that will come into contact with food in the
manner described in the cleaning section.
3.2. Use and care:
INSERTING / REMOVING THE BATTERY / S:
- Caution: During the handling of batteries, do not
touch both poles at the same time, as this will provoke
the partial discharge of the stored energy therefore
affecting lifespan of the battery.
- Remove the battery case lid.
- Ensure that the plastic covering that protects the
battery has been removed (some batteries are sold
with a protective cover).
- Insert the battery into the designated area, taking into
account the polarity (Fig.1).
- Replace the battery case lid.
- It is essential that the batteries should always be the
same brand and have the same charge. Never mix
alkaline batteries with normal ones (i.e. Carbon- Zinc)
and/or rechargeable ones.
- N.B. When changing the batteries, the configuration
of the appliance will be reset, and you will need to
reprogramme the parameters of the appliance.
Use:
- Turn the appliance on, by using the on/off button.
- Place the items to be weighed in the middle of the
appliance's weighing platform, avoiding sudden
movement or contact with other objects, until the
appliance shows the weight. Correct weight will be
displayed after 2-3 seconds.
- To avoid inaccurate results caused by electromagnetic
interference between
equipments, do not use this appliance near to a cell
phone or microwave oven.
-If the unit is not in use it will automatically switch off
after 90 Seconds.
Weighing units selection function Kg/g/Lb/Oz:
- The appliance includes a tare function. This function
is useful for weighing different items one after
the other, without having to remove everything from
the weighing platform each time.
Fig.1 Fig.2 Fig.3
- For example, if you want to weigh 100g of flour and
25g of water, you can weigh the 100g of flour and then,
by pressing on the tare button, reset the screen to
"0.00", then you are able to weigh the 25g of water.
-Once the Tare button has been pressed wait 2-3
seconds until the screen displays "0.00".
4. Cleaning
4.1. Except for the power unit and the mains
connection, all the parts can be cleaned with detergent
and water or in washing up liquid. Rinse thoroughly to
remove all traces of detergent.
4.2. Clean the outer parts of the appliance with a damp
cloth with a few drops of washing-up liquid and then
dry. CAUTION! Do not immerse electrical parts of the
appliance in any liquid.
4.3. Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive products, for
cleaning the appliance.
5. Anomalies and repair
5.1. Take the appliance to an authorised support centre
if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
6. Special messages:
The following messages can appear on the screen:
- EEEEE: means that the appliance's capacity has
been exceeded, remove whatever is on the weighing
platform.
- Lo: means that the battery has to be changed or, if
applicable, recharged.
electrical and electronic