Reversing The Door - Hisense FV298N4AWE Manual De Funcionamiento Para El Usuario

17
the compartment
Temperature inside is
too warm
Temperature inside is
too cold
Doors can't be closed
easily

Reversing the door

The side in which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
allows for it. Tools you will need:
Before you start lay the freezer on
Note:
it's back in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
food is placed within the appliance to allow sufficient
ventilation. Ensure that door is fully closed. To remove the
frost, please refer to the"Cleaning and care" chapter.
You may have left the doors open too long or too frequently; or
the doors are kept open by some obstacle; or the appliance is
located with insufficient clearance at the sides, back and top
Increase the temperature by following the "controls panel"
chapter.
Check whether the top of the refrigerator is tilted back by 10-
15mm to allow the doors to self close, or if something inside is
preventing the doors from closing.
damaging the backboard of the freezer. To
reverse the door. The following steps are
generally recommended.
1．Stand the freezer upright.
Remove the screw hole cover and upper
hinge cover（right）as follow diagram.
2. Remove the three screws as follow
diagram. Lift the right upper hinge part.
3.Lift the door and place it on a padded
surface to prevent scratching.