Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
3. AC/DC Adapter
Model
Input power source
Output voltage
Operating temperature range
Weight
Electric control
○ Braking Function
Brake is activated when the switch is turned off ,
stopping the motor's rotation.
○ Full speed at all times in the range up to rated load
○ Soft-start
○ Variable speed
○ Overload protection
This protection feature cuts off the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
12
UC18YFSL
Single phase: AC 120 V 60 Hz
BSL36B18: Approx. 120 min
DC 14.4–18 V
DC 3.5 A
1.1 lbs. (0.5 kg)
ET36A
Single phase: AC 120 V 60 Hz
36V
14°F (-10°C)–104°F (40°C)
Adapter : 1.8 lbs. (0.8 kg)
Box : 2.6 lbs. (1.2 kg)
○ Overheat protection
This protection feature cuts off the power to the motor
and stops the power tool in the event of overheating
of motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down
in a few minutes.
After that you can use it again.
○ Restart prevention function
When the power is still switched on, the tool will not
restart when a battery is installed. This function can
be canceled once the tool is switched off .
Tabla de contenido
