Parts List; Product Set Up; Product Use; Base Installation - Nuna Meet your Bugaboo 360 base Manual De Instrucciones

EN

Parts list

Make sure all parts are available before assembly.
If any part is missing, please contact local retailer.
No tools are required for assembly.
1 ISOFIX Adjuster Button
2 Child Restraint Release
Button
3 Load Leg
4 Load Leg Adjustment
Button
1
2
3
4
6
5 ISOFIX Guides
6 ISOFIX Connector
7 Instruction Manual Storage
Compartment
8 Infant Carrier Rotation
Button
8
7
6
5

Product set up

Installation concerns
This enhanced child restraint is only suitable for vehicle seats
equipped with ISOFIX anchorage bars. (1)
DO NOT install this enhanced child restraint on vehicle seats that
face sideways or rearward with respect to the moving direction of
the vehicle. (2)

Product use

Base installation

1.
Attach the ISOFIX guides to the vehicle's ISOFIX anchor bars
(see vehicle owner's manual). (3) The ISOFIX guides can
protect the surface of the vehicle seat from being torn. They
can also guide the ISOFIX connectors.
2.
Unfold the load leg from storage compartment. (4)
3. Extend the ISOFIX connectors by pressing the ISOFIX
adjustment button while pulling on the connector. (5)
4. Press the ISOFIX adjustment button to adjust the ISOFIX
connectors. Line up the ISOFIX connectors with the ISOFIX
guides, and then "click" both ISOFIX connectors into the ISOFIX
anchor bars. (6)
Make sure that both ISOFIX connectors are securely attached
to their ISOFIX anchor bars. There should be two audible clicks
and the colors of the indicators on both ISOFIX connectors
should be completely green. (6)-1
Check to make sure the base is securely installed by pulling on
both ISOFIX connectors.
EN
7