Operating The E-Bike; Assembly Of The Pedals; Seat Height Adjustment - m-cro MICRO E-BIKE Traducción Del Manual Original

OPERATING THE E-BIKE

Assembly of the pedals

If your e-bike has been delivered with loosely enclosed pedals, you must assemble
them with a suitable wrench. Note that the two pedals must be screwed in different
directions and tightened to a high torque (40 Nm). Coat both threads with assembly
grease.

Seat height adjustment

1. The seat height can be adjusted by releasing the quick release lever. Then raise or
lower the seat and tighten the quick release lever when the desired height is reached.
2. After adjustment, check that the lever is tight and does not move in any direction
in the seated position.
3. The seat post clamp must be tight.
EN
50
ebike_V5.indb 50 ebike_V5.indb 50
WARNING
WARNING
Failure to secure the seat properly may result
in death or serious injury.
DO NOT lift the seat beyond the minimum
mark on the seat post.
2020/7/31 17:39:23 2020/7/31 17:39:23