Initial Setup; Before Using For The First Time; Before Each Trip - m-cro MICRO E-BIKE Traducción Del Manual Original

INITIAL SETUP

Before using for the first time

● Check that the goods are all present:
- E-bike, pedals, charger & power cable, user manual.
● The end of this user manual contains the Micro-pass. Fill out the Micro-pass
completely and store it together with the purchase receipt. The Micro-pass enables a
smooth processing of repairs and warranty issues.
● The battery is only partially charged upon delivery. Before using for the first time,
fully charge the battery using the charger provided.

Before each trip

The electric bike must be checked for its roadworthiness before each trip. The vehicle
is delivered by the manufacturer fully ready for use. Because defects potentially
impairing the function of the vehicle may occur during transport as well as during any
periods off the road, please always pay attention to the following points before using for
the first time and before each trip:
Test item
Lights:
General condition:
Brakes:
Folding mechanism:
Battery charge status:
Current riding mode:
EN
46
ebike_V5.indb 46 ebike_V5.indb 46
Test content
Are the lights turned on?
Are all screws tightened firmly and all components secured?
Are the brakes set correctly and fully functional?
Has the folding mechanism clicked into place properly and is the
clamping lever closed and tightened firmly?
Is the battery sufficiently charged?
Which gear is currently set?
2020/7/31 17:39:23 2020/7/31 17:39:23