Common Operation; Selecting A Source - Furrion DV3100 Manual De Instrucciones

Common Operation

Turning On and Off the unit
Pressing the power button will turn on or
enter standby mode.

Selecting a Source

1. Use INPUT MODE button on the front panel
Press INPUT MODE button repeatedly to
select Tuner, Disc (After inserting a disc),
USB (After inserting a USB storage), BT, AV
IN and AUX mode.
Note: Pressing BT button to enter into the
Bluetooth mode directly. Press again to
back to current playback mode.
2. Use the corresponding buttons on the
remote control
DVD / USB - once a DVD or USB is inserted
into the unit, the unit will automatically
switch to display this source menu. Press
this function button on the remote control
to select DVD if a disk is already inserted
and the unit is playing from another source.
AM / FM - Pressing this button on the
remote control will scroll through the FM1,
FM2, FM3, AM1, AM2. To switch this units
AM/FM receiver between USA and Europe
frequencies, press and hold PLAY / PAUSE
button on the front panel for 5 seconds
until the region is displayed on the screen.
AUX / AV IN - these buttons on the remote
control allow you to scroll through the
AUX / AV IN inputs fitted to the stereo.
AUX - connection on the front of the unit
(Audio and Video input function).
AV IN - connection on the rear of the unit to
connect an external audio source.
3. Volume Adjust
Rotate VOLUME KNOB clockwise to
increase volume, rotate anticlockwise to
decrease volume.
4. Mute
Press MUTE button to mute what ever
source is playing and display mute on the
screen.
Press MUTE button again to resume.
5. Clock Set
● To display the clock on the LCD display,
● To adjust or set the clock, press and hold
6. To select a preset EQ mode
7. To turn on / off LOUD mode
8. To adjust the sound equalizer curves
9. ZONE 1/2 BUTTON
10. Press the
11. To reset the unit
CCD-0005528 | REV DATE: 11.29.22
press CLOCK button on the remote control.
CLOCK button on the remote control until
the clock set feature is displayed on the
LCD display of the stereo then use VOLUME
KNOB on the unit or + and - on the remote
control to adjust the time, push in the
volume knob on the stereo or press SEL
button on the remote control to change
from setting hours to minutes. Once time is
set the stereo will automatically set after a
few seconds without any operating.
Press and hold BT button on the front panel
or briefly press EQ button on the remote
control to select the preset music equalizer
curves: CINEMA, ROCK, CLASSIC, FLAT.
The sound effect will be changed.
Press and hold LOUD button on the remote
control to turn on / off LOUD mode.
To adjust the sound equalizer curves,
briefly and repeatedly press SEL button
on the remote control to select the sound
equalizer curves of VOL, BAS (without
preset EQ), TRE (without preset EQ), BAL,
BEEP (ON/OFF), then rotate the VOL KNOB
on the front panel or press the + and - on
the remote control to adjust level.
Pressing ZONE 1 or 2 button will turn on or
off the audio source in each of the different
areas which your speakers are connected.
"ZONE <1 >" or "ZONE <2>" will display on
the LCD once it is selected.
button or TITLE button to
return to the previous menu.
When the display is incorrect, or the
function buttons are not effective or sound
is distorted, then use a sharp point to press
RESET button, that will make the unit be
reset to factory default and re-instate the
correct functions.
16