Tabla de contenido
Parts
Air
Handle
intake
Trigger
Cartridge
lock
Staples
Contact
cartridge
lock
Start Up
Air Supply Connection
• Before connecting to the tool, connect the hose to the
A
compressor and let some air run through the hose and
coupling, to verify both are clean.
B
• If a filter-oil feeder similar to the one recommended in
page 3 is not available apply a few drops of oil suitable for
tools into the air inlet (A).
• Connect the air hose to the tool with an empty cartridge
using a fast coupling (B).
CAUTION
Before
connecting the hose to the tool double check the staple
cartridge is empty.
C
• The fast coupling is very useful to quickly connect and
disconnect the tool and interchange them easily.
Cartridge Loading
• Disconnect the air hose from the tool.
• Verify that the machine has no pressure and there are no
staples stuck.
• Pull the retainer (C) until it snaps and stops at the rear
notch of the cartridge.
• Place the staples on the cartridge by passing its tips on
both sides of the cartridge.
CAUTION
Make sure staples are not dirty or
damaged.
• Lift the retainer to release it from the notch and push the
staples toward the trigger mechanism.
7
ENGLISH
Tabla de contenido
