Miniland singing buddy Manual Del Usuario página 11

a time, and, as such, if your extractable module is already connected
to another device it will not appear on your search .In order to be
able to connect successfully to the new device, first turn off and
turn on again your extractable module and carry out one of these
three actions.
a) Manually unpair the extractable module of the previous device
to which it was connected from the Bluetooth Settings' menu of
your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the extractable
module previously is outside the coverage range of the extractable
module.
6. If the connection is correct, you will hear a beep on your
extractable module and the LED (2) light will start flashing blue
more slowly. Now you can listen to the songs and sounds included
in the relaxation section of the eMyBaby application from your
extractable module. Whilst the music or sounds are playing, your
LED (2) light will come on, fixed and blue.
7. If the next time you are using singing buddy you will be doing
so on the same mobile device, the connection will be made
automatically if you enable the Bluetooth on your device first in
the manner indicated previously and then your extractable module.
If the next time you wish to use singing buddy on another mobile
device, follow the recommendations set out in point 5 of this
same section.
Note 1: The extractable module may only be connected to one
single device at any time.
Note 2: Keep your mobile device near the extractable module
during pairing.
Warning 1: If you wish to use singing buddy with another mobile
7. IDENTIFYING AND SOLVING PROBLEMS
PROBLEM
Your mobile device is
unable to detect the
extractable module
within its range of
coverage on conducting
a search for Bluetooth
devices
Your mobile device is
unable to detect the
extractable module
within its range of
coverage on conducting
a search for Bluetooth
devices
The extractable module
does not play anything
at all
Some of my playlists are
empty or do not contain
all the songs available
POSSIBLE CAUSE
Your extractable module is not turned on.
Your mobile Bluetooth is not turned on.
The extractable module is connected to
another mobile device or tablet
Your extractable module battery has run
down completely
The volume on your mobile device is
too low
The extractable module is not turned on
Your extractable module battery has run
down completely
You have not completely downloaded
all the songs featured in the relaxation
section
device, firstly turn off and then turn back on again your extractable
module and carry out at least one of these three actions:
a) Manually unpair the extractable module of the previous device
to which it was connected from the Bluetooth Settings' menu of
your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the extractable
module previously is outside the coverage range of the extractable
module.
Warning 2: The range of your extractable module is around 10
metres so never move your mobile or Tablet more than this distance.
In the event that you lose range, bring your mobile device or Tablet
near to the extractable module again. The music or sounds will
continue automatically once you bring both devices close again.
6. MAINTENANCE
6.1. CLEANING THE EXTRACTABLE MODULE
Follow the instructions set forth below to clean your extractable
module:
- Use a slightly damp cloth to clean the surfaces, taking care not
to let water infiltrate any of the openings.
- Do not use cleaning products or solvents.
6.2. CLEANING THE PLUSH TOY
Follow the instructions set forth below to clean the plush toy:
- Do not use bleach.
- Clean it by hand, do not use a washing machine or dry cleaning
in order to preserve the toy.
- Drain any excess water (do not wring it) and leave it to dry in the
air. Do not use a drier.
- Do not iron it.
SOLUTION
Turn it on as illustrated in item 5.1
Turn on your mobile Bluetooth as illustrated in item 5.3.2
a) Manually unpair the extractable module of the previous
device to which it was connected from the Bluetooth
Settings' menu of your mobile or Tablet.
b) Disable Bluetooth from the device to which the
extractable module was connected before.
c) Make sure that the device that was connected to the
extractable module previously is outside the coverage range
of the extractable module
Charge your extractable module as illustrated in item 5.2
Turn up the volume on the device
Turn it on as illustrated in item 5.1
Charge your extractable module as illustrated in item 5.2
Access the eMybaby relaxation application again. If you
have not downloaded all the songs available an alert will
appear reminding you to do so
11
ENGLISH