NEUROTECH Recovery-Back Manual Del Usuario página 12

Abdomen Garment
This section explains how to set-up the gel pads on the abdomen garment before using it for the first time.
Step 1: Turn the abdomen garment over so the 3 silver studs are facing upwards. Remove the three gel pads from their
package. There is one large square pad and two smaller oval pads. One side of each pad has a grid pattern on it while the
other side is plain back. See below for placement of gel pads.
Step 2: Remove the liners from the grid patterned side of the large, square gel pad and place
it grid side down over the middle stud and between the white lines. (Fig. D)
Step 3: Now, remove the liners from the grid patterned side of the two smaller oval shaped gel pads and place them on
either side of the large pad on the garment.
Note: One size fits all for the abdomen garment however, the location of
the smaller side pads depends on your waist size. In the example below, the
smaller pads are placed nearest to the large, central pad. This is for a user
whose waist size is 24"-32". Use the sizing guidelines on the right, to help
you choose your correct pad location.
Abdomen Garment Gel Pad Locations: Place a gel pad on each side of the
3 2 1
center pad at designated locations.
Important: Before you progress, make sure that all silver studs are completely covered by the gel
pads. Press the edges of all three pads firmly onto the garment before use.
Extender Strap: Use of the extender strap will be required for waist sizes from 47" to 56''. Use the
outer gel pad locations when using the garment extender strap. Attach the extender strap to one
end of the abdomen garment in order to extend the overall length.
Step 4: Remove the liners from the black side of all three pads. Do not throw these liners away as
you will need to put them back on to the pads at the end of your session.
10