Tabla de contenido
Step 3: Add litter sand
Make sure the leveled litter height
is between the MAX line and the
MIN line. (The amount of sand can
be adjusted according to the actual
situation.)
Notice:
Please do not add too much cat
litter to avoid splashing out of the
litter box during cleaning and
polluting the environment.
Step 5: Use
Power on with adapter and wait the machine to self-check for about 3-8 minutes. It will
automatically enter the state of sensing after self-check, no need to change its program.
After the cat leaves, the product will automatically clean up the clumped cat excrement in
about 3 minutes, last for 4 minutes.
After cleaning, the product will automatically start the smell cleaning function, and last for 30
minutes.
Notice:
×
Do not pick up or drag the product after powering up. (This will interfere with weight
calibration in the reset program.)
If you place the product in a narrow space or there is an infrared interference source
Ø
in front of the product, the product self-check may take about 8 minutes. Please wait
patiently.
If the product detected that the space is not suitable for its infrared sensor to work,
Ø
the infrared detection function will be automatically disabled after self-check is
completed. But the weight detection system inside the product will assume the
judgment work of whether the cat enters.
During the clearing process, all keys are suspended. If you need to perform other
Ø
functions, please wait until the clearing process is complete.
- 20
Tabla de contenido
