Care And Maintenance; Food Storage - Create FRIDGE STYLANCE Manual Del Usuario

Ocultar thumbs Ver también para FRIDGE STYLANCE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
The refrigerator has been equipped with an automatic defrost function (no-frost). The de-
frost water will go into the water pan and evaporate.
• The inside of the refrigerator should be thoroughly cleaned every year. Always remember to
unplug before cleaning the plug from the outlet and emptying the refrigerator.
• Clean with a damp cloth or sponge dampened with water or a mild detergent. To clean the
refrigerator, never use solvents, boiled water, powder detergent, acid or the like.
• In a humid environment or rainy weather, the surface of the refrigerator may be dewy, es-
pecially on the outer surface of the door. This is caused by contact with moisture in the air.
In such a case, the surface can be dried with a dry cloth.
• In order to ensure the normal operation of the refrigerator for a long period of time, the user
should inspect the refrigerator regularly. If you find any abnormality, contact the technical
service.
• During the cleaning operation, do not use water to rinse the compressor compartment of
the refrigerator.
• After cleaning the refrigerator, dry it with a dry cloth to prevent rust.
• Take special care with the door gasket as if any liquid falls it could damage it. Make sure
to keep it clean and dry.
Take out and put in the shelves
• Hold the rear part higher to slide the shelf out, then slide it in as far as it will go so its brack-
et can fit into the guide slot.
Take out and put in the drawer
• Make the front part higher and pull it out, then slide it as far as it will go until it stops.
Take out and put in the door rack
• Lift the door shelf up, remove it and reposition it from above in the required position.
After cleaning check that:
• There is no damage to the power cord.
• If the plug can be plugged in without problems.
• If there is any abnormal heat in the plug.
• If any of the above happens, unplug the refrigerator and contact technical support.
1. Before storing food in your refrigerator, make sure the food, especially food with water, is
dry and not leaking.
2. Hot or warm food should be placed in the refrigerator after cooling to save energy.
3. Each shelf can be removed for easy access to bottles.
4. Leave adequate space between foods for better air ventilation in the refrigerator.
5. It is recommended to store food in pieces for best results.
6. Store fruits and vegetables after cleaning in proper wrapping or in properly sealed con-
tainers to avoid unexpected odors.
7. Store fruits and vegetables in the crisper so they stay fresh.
8. Keep fresh, hot foods at room temperature away from products that have already been
frozen.
E NGL I SH
10

CARE AND MAINTENANCE

FOOD STORAGE

Tabla de contenido
loading

Tabla de contenido