poolstar POOLEX MAG Serie Manual De Usuario Y Instalacion página 88

!
PLEASE READ CAREFULLY
These installation instructions are an integral part of the product.
They must be given to the installer and retained by the user.
If the manual is lost, please consult the website:
www.poolex.fr
The instructions and recommendations contained in this manual should be read carefully and
understood since they provide valuable information concerning the heat pump's safe handling and
operation. Keep this manual in an accessible place for easy future reference.
Installation must be carried out by a qualified professional person in accordance with current
regulations and the manufacturer's instructions. An installation error may cause physical injury
to persons or animals as well as mechanical damage for which the manufacturer can under no
circumstances be held responsible.
After unpacking the heat pump, please check the contents in order to report any damage.
Prior to connecting the heat pump, ensure that the information provided in this manual is compat-
ible with the actual installation conditions and does not exceed the maximum limits authorized for
this particular product.
In the event of a defect and/or malfunction of the heat pump, the electricity supply must be
disconnected and no attempt made to repair the fault.
Repairs must be undertaken only by an authorized technical service organization using original
replacement parts. Failure to comply with the above-mentioned clauses may have an adverse
effect on the heat pump's safe operation.
To guarantee the heat pump's efficiency and satisfactory operation, it is important to ensure its
regular maintenance in accordance with the instructions provided.
If the heat pump is sold or transferred, always make sure that all technical documentation is
transmitted with the equipment to the new owner.
This heat pump is designed solely for heating a swimming pool. Any other use must be considered
as being inappropriate, incorrect or even hazardous.
Any contractual or non-contractual liability of the manufacturer/distributor shall be deemed null
and void for damage caused by installation or operational errors, or due to non-compliance
with the instructions provided in this manual or with current installation norms applicable to the
equipment covered by this document.
2 | EN