Control Panel - Klarstein Vinamour Manual Del Usuario

All manuals and user guides at all-guides.com
EN

CONTROL PANEL

Note: No buttons will work when locked. Make sure to unlock them first.
ON/OFF:
1. Hold down the button for 3 seconds and it will power down and go
into stand-by mode.
2. Hold down the button for another 3 seconds to switch the appliance
back on.
Light:
Press the button to turn the LED lights inside the appliance on or off. In
stand-by mode, this button will not work.
Zone switch:
Press the button to switch between the upper zone and lower zone when
choosing which zone to set the temperature for. Press the button once and
the LED display in the chosen zone will flash multiple times. Press the up
and down buttons to set the temperature. Press the button again to switch
zones and then set the temperature.
UP:
Press the button once and the LED display will flash, showing the current
set temperature. Continue pressing to adjust the set temperature; each time
you press the button, the temperature will increase by 1°C. The display
will stop flashing after 5 seconds if it detects no activity and the new set
temperature will be saved. The LED display will return to showing the
current temperature inside.
Down:
Press the button once and the LED display will flash, showing the current
set temperature. Continue pressing to adjust the set temperature; each
time you press the button, the temperature will decrease by 1 . The display
will stop flashing after 5 seconds if it detects no activity and the new set
temperature will be saved. The LED display will return to showing the
current temperature inside.
21