Cojali jaltest tools 50105082 Manual De Usuario página 9

CAUTION: If the silentblocks are not correctly installed, the vehicle stability will de-
crease and it could cause fatal accidents or severe injuries.
3.
Lubricate the bearing, the washers and the threaded bar with standard grease.
4.
Thread the bar through the silentblock until the sleeve is adjusted in the silent-
block housing. The centring nut must be placed on the other side until reaching the
silentblock.
5.
Turn the nut of the threaded bar with a wrench until the centring nut pushes the
silentblock completely into the sleeve.
6.
Reverse the turning direction with the wrench to disassemble the kit.
7.
Remove the damaged silentblock and clean the sleeve.
8
EN