Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.2 SILENTBLOCK ASSEMBLY
1.
Lubricate the bearing, the washers and the threaded bar with standard grease.
2.
Apply lubricant P-80 uniformly, both in the housing and the outside of the silent-
block.
CAUTION:
The use of the incorrect lubricant during the assembly can reduce the
vehicle stability and cause fatal accidents or severe injuries. Do not lubricate with
standard grease or oil.
3.
Insert the new silentblock into the sleeve through the end opposite to the cover.
Make sure the mark of the new silentblock is correctly aligned with the horizontal
line of the sleeve.
Furthermore, the text "TOP" must remain in the upper side.
10
EN
Tabla de contenido
