Ohyama WOOZOO AP45-M Manual De Usuario página 9

K
Clean sensor indicator
If the indicator is illuminated, it's
time to clean the sensor. (→P16）
Change filter indicator
If the indicator is illuminated,
it's time to change the filter.
(→P16）
Turbo button/lamp
Press the button to turn on the lamp and
perform the turbo operation of AP45-M
for about 10 minutes.
（→P12）
Operation mode button/lamp
Every time the button is pressed, the operation
mode is changed as below. (→P12）
Silent→Normal→Strong→Automatic operation
Reset button
After changing the filter or cleaning
the sensor, press the button located
at the back of the hole and turn off the
change filter and clean sensor indicators.
（→P16）
Operation OFF/ON button
Press the button to turn on the power
and start operation with the same
operation mode before stopping the
operation.
Press the button again to stop operation
and turn off the power. （→P12）
9
AP45-M