Ohyama WOOZOO AP45-M Manual De Usuario página 16

K
Cleaning and maintenance
■ When the clean sensor
indicator lights up
The (clean sensor)
let you know when it is time to clean the sensor.
Light up
• Open the dust sensor cover in the side of the body
and remove the sponge filter.
Wash the sponge filter in waster, dry thoroughly
and put it back to the original place.
Sponge filter
• After installing the sponge filter again, press the
(reset) button and turn off the (clean
sensor)
Press the back of the hole in the operation panel
• Do not operate the product without the sponge filter
(the dust sensor cannot measure the dust level
properly).
※ Lighting time of the (clean sensor)
indicator varies based on the operation frequency.
Under the normal operation environment, the
indicator will light up after 1 month use.
indicator lights up to
Dust sensor cover
indicator.
Continue
■ When the change filter
indicator lights up
The (change filter)
let you know when it is time to change the filter.
Light up
• Purchase a filter sold separately （→P18）and
change the filter according to the procedures of
"Preparations before use."（→P10）
• After changing the filter, press the (reset)
button and turn off the(change filter)
indicator.
Press the back of the hole
in the operation panel.
※ Lighting time of the (change filter)
indicator varies based on the frequency of
operation and the density of polluted air. Under the
normal operation environment, the indicator will
light up in 2 years.
● If the (clean sensor)
(change filter)
same time, press the reset button to turn off the
indicators.
16
AP45-M
indicator will light up to
indicator and
indicator light up at the