Functions; Zero Setting; Conversion - Workzone DC-1 / 650080 Manual Del Usuario

USA

Functions

5. Read the result of the measure-
ment on the LCD display
6. Push the OFF/ON button to switch
the caliper off.
Functions

Zero setting

The zero setting can be performed
in any position and facilitates step
measurements
− Push the ZERO button
set the zero point. This makes it
possible to perform differential
measurements.

Conversion

The mm/inch conversion may be
performed in any position.
− To display the result of the mea-
surement in another unit, push
the mm/inch button
16
You can lock the caliper
with the locking screw
6
to fix the result of
the measurement.
15 .
Negative measure-
ments are displayed
with a "–".
5
.
12
to
7 .