Handling - Workzone DC-1 / 650080 Manual Del Usuario

Handling

1. Push the OFF/ON button
switch the caliper
2. To select the desired unit of mea-
sure (metric/inch), push the mm/
inch button
3. Set the caliper to 0 by pushing
the ZERO button
start the measurement. For ad-
ditional functions of the caliper,
refer to the chapter "Functions".
4. Move the slider
fine adjustment dial
form a measurement.
After inserting the
battery, the caliper
will need approxi-
mately 5–6 seconds
to configure itself. The
caliper may only be
switched on once the
configuration process
is complete.
7 .
The caliper saves the
set unit of measure
for the next time you
use it.
12
9
Handling
13
1 on.
in order to
or turn the
11
to per-
USA
to
15