auna Glastonbury Go Manual De Instrucciones página 27

confirm
• Set 12/24 hour: Press
the TUNING knob to select the available options:Set 12 hour / Set 24
hour. And the press
Sleep Timer Setup
This unit can switch to standby automatically after a period.
1. Hold and press
to "System" showing on the display. And then press MENU|INFO to
enter.
2. Rotate the TUNING knob to "Sleep" position and press
to enter.
3. Rotate the TUNING knob to select the time period: off, 15, 30,45,60,90 .
And the press the
Language Setup
1. Hold and press MENU|INFO to enter menu. Rotate the TUNING knob
to "System" showing on the display. And then press
enter.
2. Rotate the TUNING knob to "Language" position and press
to enter.
3. Rotate the TUNING knob to select the desired language . And the press
the
Backlight Setup
1. Hold and press MENU|INFO to enter menu. Rotate the TUNING knob
to "System" showing on the display. And then press
enter.
2. Rotate the TUNING knob to "Backlight" position and press
to enter.
3. Rotate the tuning knob to cycle through the below options.
• Timeout (To define the duration of the backlight before it it dimmed.):
Press
select the timeout options: On(the backlight does not dim), 10 Sec,
20 Sec, 30 Sec, 45 Sec, 60 Sec, 90 Sec, 120 Sec, 180 Sec, and press
to confirm.
• On Level(To define the brightness level when the backlight is switched
on) : Press
knob to select the brightness levels: High/Low/Medium and press
to confirm.
to enter "Set 12/23 hour". Rotate
to confirm
to enter menu. Rotate the TUNING knob
to confirm.
to confirm.
to enter "Timeout". Rotate the TUNING knob to
to enter "On level". Rotate the TUNING
to
to
EN
27