9 Folding steps
Note: for your safety, turn off the power before folding. Since the product can be folded, do not step on or turn the folding
handle when riding.
1. First press the folding switch and turn the folding
handle 180° anti-clockwise . Turn the handlebar 90°
clockwise. After that, return the folding switch and lock
it.
3. Pull out the mushroom head pin and clip it into the pin
hole of the upper cover of the fender.
2. Press the folding switch and rotate the folding handle
180° anti-clockwise. Then lower the column..
4. Fold up the foot support bracket to complete folding.
13
10 Charging
Note: Please always use the original charger
to charge the scooter.
11 Carrying
After folding, the scooter can be carried in one or two hands.
1. Open the waterproof cover of the charging port.
2. Open the rubber plug of the charging port.
3. Close the rubber plug after charging.
4. Close the rubber plug after charging.
5. Close the waterproof cover of the charging port.
When the charger's LED shows red, it means it is charging, when the
charger's LED turns green, it means the battery is fully charged.
Warning!
1) Do not touch the interface when charging, be careful of electric shock.
2) Please check whether the power switch is off before charging.
3) Do not turn on the power switch when charging
4) Do not use this product when charging to avoid the damage.
5) It is recommended to charge at 0-45 ℃.
6) Please keep the scooter body away from heat source, open fire, flammable and explosive gas (liquid).
14