NAVEE N65 Manual De Instrucciones página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
7. Open case assembly of scooter
Folding handle
Folding switch
Pole unlocking
Handlebar unlocking
Folding switch
Folding handle
Safety tips: before each ride, please check to ensure that the screw,
folding switch and other link parts are not loose.
The scooter unfolds and opens the
kick step
(There are 8 main deployment steps)
Unlocking
a. Pull out the mushroom head pull pin
in the direction of the arrow.
b. After erecting the vertical column,
turn the folding handle 180 ° anti-
clockwise to lock.
c. Turn the handlebar folding handle
180 ° anti-clockwise to lock.
d. Turn the handlebar 90 ° anti-
clockwise. The folding handle can be
locked after returning to its original
position.
11
13 Operating instructions
Power switch
Press and hold the power button for 3 seconds to turn on the scooter. After power on, press the power button for 3
seconds to turn it off.
Gear setting
Press the shift button once to shift the gears.
Speed control
Press the right thumb accelerator to control the speed range (1-15.5mph(25 km/h))
Brake control
Hold the brake control on the left to brake. The greater the holding force is, the greater the braking force is. When
braking quickly, it is easy to fall due to the loss of traction, and you are at risk of serious injury. Please driveat
moderate speed and pay attention to potential dangers.
LED front lamp switch
In the power on status, click the power key to turn the front lamp on and off.
Emergency braking
In case of emergency, hold the left brake tightly to control the brake, which can activate the rear wheel friction brake
and the front wheel electromagnetic brake at the same time. In order to avoid riding risk and damage to the rear
wheels, the rear emergency brake should not be used during normal driving within the speed control range.
Tyre pressure
Before riding, please make sure that the tire pressure is not lower than 210KPA and the maximum pressure is not
higher than 230KPA. If the tire pressure is too high, there is a risk that the tyre will burst. If the tire pressure is too low,
the mileage will be reduced and the tire will be damaged. If the scooter is not used for a long time, the tire pressure
may also be lower than the standard(Note: solid tire is not in the scope of requirements.)
16
Tabla de contenido
loading

Tabla de contenido