Hisense RT728N4WCE Manual De Instrucciones página 37

Display controls
Display panel on door
Display panel on door
Controlling the temperature
We recommend that when you start your
refrigerator for the first time the
temperature for the refrigerator is set to
4 C if you want to change the
temperature follow the instructions
below
Caution
When you set temperature you set an
average temperature for the whole
refrigerator cabinet. Temperature inside
each compartment may vary from the
temperature values displayed on the
panel depending on how much food you
store and where you place them.Ambient
temperature may also affect the actual
temperature inside the appliance.
Fridge
Press ZONE CHOICE
light will turn on.Then press
SETTEMP you can set fridge
temperature between 2 C and 8 C as
needed and display panel will display
corresponding values according to the
following sequence.
Freezer
Press ZONE CHOICE
light turns on.Then press SETTEMP
can set freezer temperature between -14
C and -24
panel will display corresponding values
according to the following sequence.
Super Freezer
Super Freezer will quickly lower the
temperature within the freezer so food will
freeze faster.This can lock in the vitamins
and nutrients of fresh food and keep food
fresh longer.
You can press SUPER to get into
superfreezer mode.
Whenesuperfreeze Mode is selected,
the light will be illuminated and the freezer
Temperature will be set at -24 C.
In case of the maximum amount of food
to be frozen,please wait about 24h.
Superfreeze automatically switches off
after 52 hours and then the freezer
temperature setting will revert back to the
previous setting.
Ecoenergy
This function makes the freezer work in a
power saving mode which is useful for
the
reducing energy consumption when you
are away.
You can press ECOMODE to get into
economic energy mode.
When economic energy Mode is
activated the light will be illunminated,
The freezer temperature will be set at -
when the
C as needed and display
13
you