Tabla de contenido
Maintenance
• The pump does not require maintenance only if
following these simple precautions:
• When there is risk of frost empty the pump completely.
Remove the foot valve to drain the pipes.
• If the pump will remain idle for long periods of time, it
is recommended to empty it completely, rinse with clean
water and store in a dry place.
• If the shaft is not turning freely, use a screwdriver to
release it. Insert the screwdriver in the rear orifice of the
J
pump (J)
WARNING
• Disconnect the pump from the
power supply before carrying out maintenance jobs.
• In the event the environment temperature is below
104º F, or the pump is going to be idle for long periods
of time, empty the liquid from the pipes to prevent
freezing inside the pump. Do not operate the pump
without water.
8
ENGLISH
Tabla de contenido
