Bestop 77336 Instrucciones De Instalación página 23

Section 19 Route Wire Harness; Plug CHMSL Wire Harness Connectors Together
Secure 29' Wire Harness
under bed rail with 2"
pieces of Foam Tape
1"
Route the 29' Wire Harness from the front of
the vehicle bed to the rear, underneath the bed
rail, and through each of the three clamps. )See
Detail) Attach the wire to the underside of the
bed rail using 2" pieces of the Foam Tape.
Run the wire to just 1" past the rear clamp.
P23 - 77336 Rev. F 0922
Detail
Parts
Foam Tape
Part #595.31
2" Pieces
Installation Instructions - Supertop for Trucks
Route Wire Harness
under bed rail
routing the 29' Wire Harness, plug the
2-conductor connectors at the ends of
the CHMSL Wire Harness and the 29'
Wire Harness together.
After
NOTE:
connectors before folding the top
down.
Page 23
You must unplug these
© 2020 Bestop, Inc.