ICQN MGA1-8 Serie Manual De Instrucciones página 18

GB
Secure the oven to the furniture using the screws supplied with the
appliance. Screws shall be installed by putting them through the plastics
attached on the frame of the appliance as shown in figure 5. The screws
shall not be tightened too much. Otherwise, the screw holes may wear
out.
Check that the oven does not move after installation. If the oven has not
been installed in accordance with the installation instructions, there is a
risk of overturning during operation.
Electrical Connection
The place where the product shall be installed shall have proper electrical
installation.
The mains voltage shall comply with the rating given on the product
type plate.
Connection of appliance shall be made in accordance with local and
national electrical regulations.
Disconnect the mains power before starting to install the product.
Do not connect the product to the mains until the installation is finished.
Assembly
Figure 2
18